Create a variety of automatic pans as you move your camera along the slider to boost your production value and expand your creativity with this 4' longProaim Widebase Autopan 2-Axis Slider. The slider track is made from a single piece of aluminum, allowing it to be extremely lightweight but also rigid, able to support up to 22 lb. The slider carriage features smooth gliding oil-filled bearings that help smoothen and feather starts and stops.
The track's adjustable legs enable you to adjust the height of the track on each end from 3.7 to 4.1", for leveling when placed on an uneven surface. You can also mount the slider track on tripods and light stands using the 1/4"-20 and 3/8"-16 mounting holes. Four roller bearings on the carriage allow for smooth gliding on the outer rails.
You can use the Widebase Autopan as a standard slider to create a straight side-to-side shot or adjust the center guide bar with the tuning knobs, and the auto-pan feature will turn your camera to create either panoramic or parallax shots as you slide.
The auto-pan carriage features index marks for repeatability, and it allows the camera to pan while sliding
You can slide with three panning effects:
Straight: Without any panning effect
Parallax: Pans the camera around a center point as you slide your camera
Panoramic: Pans the lens so that it pans in an outward arc
The guide rail that creates the panning effect has index marks and fine adjustment knobs, allowing you to create precise panning movements
The slider has a 3.6' travel range
The rubber feet provide a firm grip and the legs feature .4" of adjustment to allow you to level the slider on uneven terrain
The carriage has a built-in bubble level to keep your shots balanced on uneven terrain
Technical Specifications:
Type: Roller Bearing Sliding System
Load Capacity: 22 lb / 10 kg
Travel Distance: 3.6' / 1.1 m
Camera Mounting Screw: 1/4"-20 Male
Weight: 8.92 lb / 4.05 kg
Additional Features:
Leg Height Adjustment: 3.7 to 4.1" / 95 to 105 mm
Bearings: 4x Steel
Bubble Level: Yes
Camera Mounting and Tripod Compatibility:
Camera Mounting Screw: 1/4"-20 Male
Quick Release Plate Type: No Quick Release
Tripod Mounting:
1/4"-20 Female Thread
3/8"-16 Female Thread
Included Adapter: 1x 1/4"-20 Thread to 3/8"-16 Thread Adapter
Rail Specifications:
Material: Aluminum
Track Dimensions: L: 48 x W: 5.1" / L: 121.92 x W: 13 cm