The iTrack Studio Bundle from Focusrite includes everything you need to get started recording your music or broadcasts. It comes with the iTrack Solo USB audio interface, CM25S condenser microphone, HP60S headphones, a full software suite and it works with your iPad or Mac or Windows computer.
The iTrack Solo USB audio interface is made of silver "soft-touch" aluminum and features one XLR mic input with a Focusrite preamp and 48V phantom power. It supports a maximum 24-bit / 96 kHz sample rate and is equipped with one unbalanced 1/4" input with gain control for plugging in guitars, keyboards and other instruments. For connecting monitors, there are RCA phono outputs in the rear of the device and a DEVICE LINK port for connecting to your iPad. There is also a USB port in the rear for connecting to your Mac or Windows computer. Additional features include a 1/4" TRS headphone jack, zero latency direct monitoring, halo LED signal meters and a Kensington Lock slot.
The CM25S is a large diaphragm condenser microphone that can be used for recording vocals, acoustic guitar and more. You can connect the CM25S to the XLR input of the iTrack Solo using the included 3m mic cable. The included HP60S reference headphones feature a closed-back design for isolated monitoring and are adjustable to ensure a comfortable fit. They also feature an extended frequency response and they can be connected to the iTrack Solo's headphone input by using the included 1/8" to 1/4" jack adapter.
Audio Interface
2 in / 2 out USB audio interface
Conversion
96 kHz, 24-bit conversion
Mic Preamps
1 x Focusrite microphone preamplifier
Chassis
Silver "soft-touch" aluminum unibody chassis
Front Panel
1 x XLR microphone input1 x 1/4" instrument input (unbalanced)2 x gain knobs2 x gain halo signal indicators48V phantom power switchDirect monitor switchLarge monitor level dial (controls headphone & line level outputs)USB connection LED indicator1 x 1/4" TRS headphone output jack
Rear Panel
2 x RCA phono monitor outputs (unbalanced)DEVICE LINK port (to connect iTrack Solo to iPad)USB 2.0 portKensington Lock Slot
Mic Input Performance
Frequency Response: 20 Hz - 20 kHz (± 0.2 dB)THD+N: <0.002 (minimum gain, -1 dBFS input with 22 Hz / 22 kHz bandpass filter)Equivalent Input Noise (EIN): < -120 dB measured at minimum gain with, -1 dBFS (20 Hz / 22 kHz bandpass filter)Gain Range: +10 to +55 dBMax Input Level: -3 dBu
Instrument Input Performance
Frequency Response: 20 Hz - 20 kHz (± 0.2 dB)THD+N: 0.003% (measured with -1 dBFS input and 22 Hz / 22 kHz bandpass filter)Noise: -87 dBu (22 Hz / 22 kHz bandpass filter)Gain Range: -10 to +55 dBMax Input Level: -3 dBu
Instrument Output Performance
Nominal Output Level: 0 dBFS = +9 dBu (unbalanced)Frequency Response: 20 Hz - 20 kHz (± 0.2 dB)Noise: -87 dBu (22 Hz / 22 kHz bandpass filter)Gain Range: +10 to +55 dBMax Input Level: -3 dBu
Mic Output Performance
Nominal Output Level: 0 dBFS = +10 dBu (balanced)Frequency Response: 20 Hz - 20 kHz (± 0.2 dB)THD+N: <0.001% (measured with 0 dBFS input 22 Hz / 22 kHz bandpass filter, un-weighted)
Clock Sources
Internal clock only
Dynamic Range
A-D Dynamic Range: 105 dB A-weighted (all inputs)Converter Chipset A-D Dynamic Range: 114 dBD-A Dynamic Range: 105 dB A-weighted (all outputs)Converter Chipset D-A Dynamic Range: 114 dB
Sample Rates
Supported Sample Rates for Mac & PC: 44.1, 48.0, 88.2 and 96.0 kHzSupported Sample Rates for iPad: 44.1 & 48.0 kHz
Crosstalk
Input to Input: better than 90 dBOutput to Output: better than 90 dBInput to Output: better than 85 dB
Input Metering
Ring LED (Lit Green): signal present (-24 dBFS)Ring LED (Lit Red): signal overload (0 dBFS) peak held for approximately 1 sec
Microphone
Large-diaphragm condenser microphone
Headphones
Closed-back with 1/8" termination
Included Software
Ableton Live Lite 8 (professional music making software to use your iTrack Solo with a Mac or PC)Focusrite Scarlett plug-in suite (collection of software plug-ins bringing effects to music software like Ableton Live for example)Novation Bass Station (legendary Novation synthesizer modeled as a soft-synth plug-in instrument)Loopmasters Content (1GB of royalty free samples)
System Requirements
Mac: Mac OS X 10.7 (Lion) and 10.8 (Mountain Lion)PC: Windows 7 (32-bit/64-bit) and Windows 8Apple iPad: iPad, iPad 2, new iPad (3rd generation), and iPad 4 (with 30 pin to lightning adapter - not included) with iOS 5 or iOS 6
Dimensions
6.0 x 1.75 x 4.0" (150 x 45 x 100 mm)
Weight
1 lb (500 g)
In the Box:
Your wishlist has been temporarily saved. Please Log in to save it permanently.
